MUNCIE 4-SPEED TRANSMISION

M20-M21-M22

1. BEARING RETAINER

2. GASKET 39. THRUST WASHER (IN TAIL)

3. NUT (INPUT GEAR) 40. REVERSE IDLER SHAFT

4. SNAP RING (FRONT BEARING) 41. ROLL PIN (REV IDLER SHAFT)

5. FRONT BEARING 42. TAPERED PIN

6. MAINCASE 43. SEAL (REV SHIFT SHAFT)

7. GASKET 44. REVERSE SHIFT FORK

8. OIL SLINGER (INPUT GEAR) 45. REVERSE SHIFT SHAFT

9. POCKET BEARING (INPUT GEAR) 46. SHIFT LEVER (REVERSE)

10. SNAP RING 47. BALL (REVERSE SHIFT DETENT)

11. 3-4 SYNCHRO OUTER SLIDER 48. SPRING (REVERSE DETENT)

12. 4^th GEAR SYNCHRO BRASS RING 49. GEAR AND SPEEDO BULLET

13. 3^rd GEAR SYNCHRO BRASS RING 50. RETAINER AND BOLT

14. 3^rd SPEED GEAR 51. SPEEDO O-RING

15. MAINSHAFT 52. THRUST WASHER ( FRONT TANGED)

16. 2^nd SPEED GEAR 53. COUNTERGEAR SPACER WASHER

17. 2^nd GEAR SYNCHRO BRASS RING 54. NEEDLE ROLLERS

18. 1-2 SYNCHRO ASSEMBLY 55. COUNTERGEAR SPACER WASHER

19. SYNC KEY SPRING 56. NEEDLE ROLLERS

20. SYNCHRONIZER (INNER HUB) 57. COUNTERGEAR

21. SYNCHRONIZER KEY (QTY 3) 58. SPACER-INSIDE COUNTERGEAR

22. 1-2 SYNCHRO OUTER SLIDER 59. NEEDLE ROLLERS

23. 1^st GEAR SYNCHRO BRASS RING 60. COUNTERGEAR SPACER WASHER

24. 1^st SPEED GEAR 61. NEEDLE ROLLERS

25. SLEEVE (MAINSHAFT 1^st GEAR) 62. COUNTERGEAR SPACER WASHER

26. SNAP RING (REAR BEARING) 63. THRUST WASHER (REAR TANGED)

27. BEARING (REAR) 64. COUNTERSHAFT

28. MIDPLATE (BEARING RETAINER) 65. GASKET

29. SNAP RING (SELECTIVE THICKNESS) 66. E CLIP (DETENT BOLT)

30. REVERSE GEAR (SLIDER IN TAIL) 67. SHIFT FORK

31. SPEEDO DRIVE GEAR 68. 1-2 SHIFT SHAFT

32. GASKET(REAR) 69. 3-4 SHIFT SHAFT

33. TAILHOUSING EXTENSION 70. DETENT CAM LEVERS

34. REAR TAIL BUSHING 71. DETENT SPRING

35. REAR OIL SEAL 72. SEALS (SHIFT SHAFT)

36. THRUST WASHER (REV. IDLER TANGED) 73. SIDE COVER

37. GEAR (REVERSE IDLER INSIDE CASE) 74. 3-4 SHIFT LEVER

38. REVERSE IDLER GEAR (IN TAIL) 75. 1-2 SHIFT LEVER